The KST AIRLESS 68:1 is a professional airless paint machine built for high-pressure coating applications. With a 68:1 pressure ratio, it delivers exceptional output for heavy-duty industrial and marine painting — without the use of compressed air, ensuring consistent, even atomisation across large surfaces.
68:1 Pressure Ratio: The KST AIRLESS 68:1 multiplies incoming air pressure by 68 — making it highly capable of handling thick coatings, epoxies, anti-corrosion paints, and high-viscosity materials that demand sustained high-pressure output.
High-pressure airless system: Up to 300 Bar for consistent, precise atomisation
Fast, even coverage: Ideal for large industrial, marine, and construction surfaces
Low paint waste: No compressed air means less overspray and better material efficiency
Flexible voltage: Available in 220V and 380V configurations
Professional support: Flowland team available for technical guidance and after-sales service
Frequently Asked Questions
The 68:1 ratio means the pump delivers 68 times the incoming air inlet pressure as hydraulic fluid output pressure. For example, with 5 Bar of air supply, the KST AIRLESS 68:1 generates approximately 340 Bar of fluid pressure — making it suitable for thick protective coatings, epoxies, and high-viscosity materials.
An airless paint machine atomises coating material at high pressure through a precision nozzle — without using compressed air. This results in fast, even surface coverage with minimal overspray, reduced paint waste, and superior film quality compared to conventional air spray equipment.
The KST AIRLESS 68:1 is used for large surface painting, industrial facility coating, marine and ship surface maintenance, metal and steel structure painting, anti-corrosion epoxy applications, and floor and concrete coating where high output pressure is essential.
Thanks to its 68:1 pressure ratio and up to 300 Bar output, the KST AIRLESS 68:1 handles a wide range of materials — from standard emulsions and lacquers to thick epoxies, zinc-rich primers, anti-corrosion paints, and other high-viscosity industrial coatings.
The KST AIRLESS 68:1 supports nozzles from 0.015 to 0.035 inch. Heavier coatings require larger nozzle openings to maintain the required flow rate. Contact Flowland for a nozzle recommendation matched to your specific coating material and application requirements.
For questions about the KST AIRLESS 68:1, spare parts, nozzle selection, or technical consultation — please contact our professional team. We are happy to help find the right solution for your project.
Request a Quote
Fill in the form below to get information about our products and we will get back to you.
