Electric Paint Machine 395 – Electric Airless Spray Unit
The Electric Paint Machine 395 is a compact, electrically powered airless paint sprayer designed for professional coating applications. Unlike pneumatic airless machines, the 395 is driven by an electric motor — making it highly portable, easy to set up, and independent of a compressed air supply. It is well suited for construction, renovation, decoration, and light industrial coating work.
Electric-powered airless: The 395 uses a self-contained electric motor to drive the high-pressure pump — no compressor required. This makes it an ideal choice for job sites where a compressed air supply is unavailable or impractical.
Technical Specifications
Specification
Value
Model
Electric Paint Machine 395
Operating Principle
Electric-powered airless spray
Maximum Pressure
200 – 300 Bar
Flow Rate
1.5 – 6 l/min
Motor Power
800 – 3000 W
Voltage
220V / 380V
Inlet Diameter
½" – 1"
Hose Length
10 – 30 m
Nozzle Range
0.015 – 0.035 inch
Weight
20 – 60 kg
Application Areas
Interior & exterior wall painting
Roof & facade coating
Construction & renovation projects
Decorative coating applications
Light industrial surface coating
Floor & concrete surface applications
Key Features
Electric-Powered
No Compressor
Up to 300 Bar
220V / 380V
Portable
Easy Setup
Why Choose the Electric Paint Machine 395 from Flowland?
Electric-powered: No compressed air supply required — plug in and spray
Compact & portable: Easy to transport and set up on any job site
High-pressure airless output: Up to 300 Bar for consistent, even atomisation
Low paint waste: Airless spray means less overspray and better material efficiency
Versatile nozzle range: 0.015 – 0.035 inch to suit different coating materials
Professional support: Flowland team available for technical guidance and after-sales service
Frequently Asked Questions
The Electric Paint Machine 395 is a compact airless paint sprayer powered by an electric motor. It atomises paint at high pressure through a precision nozzle without requiring compressed air — making it highly portable and easy to deploy on any job site with a standard electrical supply.
A pneumatic airless machine is driven by compressed air from an external compressor, making it suited to permanent industrial installations. An electric airless machine like the 395 uses a self-contained electric motor — no compressor is needed, making it far more portable and practical for construction sites and renovation projects.
The Electric Paint Machine 395 is suited to a wide range of coatings including emulsions, latex paints, primers, lacquers, varnishes, and light industrial coatings. For very thick or high-viscosity materials such as heavy epoxies, a pneumatic airless machine with a higher pressure ratio may be more appropriate.
Airless painting delivers fast surface coverage, consistent film build, reduced overspray, and better material efficiency compared to roller or brush application. The Electric Paint Machine 395 brings these advantages to job sites that lack a compressed air supply.
The 395 supports nozzles from 0.015 to 0.035 inch. Thinner coatings such as lacquers and emulsions perform well with smaller nozzles; thicker materials such as primers require larger openings. Contact Flowland for a nozzle recommendation based on your specific coating and application.
For questions about the Electric Paint Machine 395, spare parts, nozzle selection, or technical consultation — please contact our professional team. We are happy to help find the right solution for your project.
Request a Quote
Fill in the form below to get information about our products and we will get back to you.
